wu tang

The Saga Continues

2 on 1 sheet

forgot to mention that 2 of my Pixel stools fit onto one 1800mm x 1200mm Xanita sheet, don't know why I did not mention this in my presentation...

The Pixel Stool

I did it..mostly,...

there is still a unwanted gap in my stool which I can not seem to resolve. May try later...

Final Tech Drawings

And then F@#K!!

My "Core" joining system is being a pain, I will try to do it out of Xanita now, perhaps the material strength will hold that seam together better.... Off to get my Xanita from the workshop now, hopefully it will fit in a 3 door Hatchback.....

Flat Pattern

The Core

My new joining system which seems to work pretty well, but i will have to create a new mock up to test it fully, it will add much more strength not that it particuarly needs any more, but this may be the only joining system I can get to work by Friday.

Testing 3D max scenes

Setting up a scene for my final concept poster

Fail!

Another failed joining system...

Totem

Finalising in Cardboard...

Putting the finishing touches on my flat pattern before I touch the Xanita because I didn't have my flat pattern 100% and had some things i wanted to refine a little further such as - the seat was a little small and the seat was also a little weak in the middle, changing the scale allowed me to resolve both of these issues. The joining method is still sketchy, so I am just about to attempt something a little different.